Semi-Automatic Foot Type Pneumatic Transistor Cylindrical Lithium Battery Spot Welder
Application scope of the product
Power lithium-ion battery module, 3C lithium-ion battery pack, nickel-metal hydride battery pack, hardware small parts, electronic and electrical
parts, wire terminals, stainless steel parts, metal jewelry, copper products, aluminum products, etc. At the same time, it is also suitable for product
maintenance proofing and other work.
Equipment introduction
● Welding power control adopts switch switching method, which can realise small, high-efficiency and high-output welding.
● Welding current rises very quickly, most suitable for ultra-precision welding.
● There are three types of control: ①constant current control ②constant voltage control ③combination of constant current and constant voltage control.
● Energy stored in the capacitor is used for welding, which can be used in small power conditions.
● Real-time dynamic detection of current, voltage, power and resistance waveforms.
● Automatic welding current monitoring function, can effectively monitor the welding output current, welding current exceeds the alarm in time to replenish the welding.
● Precision microcomputer technology control, can save multiple programmes and change calls at will.
● Proprietary OUTPUT ENERGY optimisation algorithm, reasonable output voltage and output current conversion, strong welding capacity, firm welding joints, no need to weld, small cremation, good welding quality.
● Industrial circuit design, safe and reliable circuit.
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Pneumatic | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Function Introduction
1. Thickened tempered glass
High quality explosion-proof glass is used to effectively prevent the damage caused to the desktop during welding. At the same time, it can increase the fluency of welding and increase the welding efficiency.
2. Cylinder drive
The air source interface is connected to the pressure regulator to adjust the air source pressure and filter the water. The gas is sent to the solenoid valve, which controls the gas drive cylinder and drives the welding head.
3. Pneumatic precision welding head
Horizontal welding structure, double linear guide design, left and right pressure can be adjusted separately. Built-in pressure sensor, precise control to apply stable pressure.
FAQ
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For the installation of some widgets, we will send out detailed training videos and user manuals randomly. 95% of customers can teach themselves.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as possible. Do not try to repair the machine by yourself or others. We will respond as soon as possible within 24 hours to solve your problem.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can provide you with advice.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on each unit. After all the tests are passed, our QC will test the welding performance.
Service process
After sale:
1. Confirm whether customers need on-site service or video communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication will be adopted to solve the problem first. Door-to-door service can be provided if there is no solution.
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
Looking forward to your consultation, we will provide you with the best quality service throughout the process!!!
Product Tags:
|
|
Semi Automatic Foot Type Pneumatic Battery Tab Welding Machine Images
|
